In my previous article, I had let you know how you can update Telcel Samsung Galaxy Core 2 Duos (SM-G355M) to Android 4.4.2 KitKat UBU0ANF7 Firmwar using the Odin method and I hope the articlewould have been of some use to you. Now I bring you but the step-by-step guide to Update Samsung Galaxy Tab3 (GT-P5210) to Android 4.4.2 XXUBNH1 Firmware. The task is easy and will help you fix bugs in your Smartphone and will bless you with brand new features that will multiply your Android KitKat experience. To perform the task you need to follow a manual step-by-step guide that I bring here today for you. Just follow this article and within a few minutes you will successfully update your Galaxy Tab3 (GT-P5210) to the Android KitKat 4.4.2 XXUBNH1 Firmware. If you are a proud owner of the awesome Galaxy Tab3 device and want to further upgrade it to the latest 4.4.2 KitKat firmware, then we have two options for you. This update has been released in Hungary and the users will get anotification in their device (since its an OTA update) to update it further. After getting the notification just they have to click on it to download and follow the appearing instructions on the screen of their Smartphone to update it further. But if they are desperate to update their device now, they can follow the below given manual update method. But before that they need to fill certain conditions, otherwise called pre-requirements for this update. Take a keen look on the requirements here.
Warning
Double check the Name and model of your device before initiating the update since this guide is meant for only the Galaxy Tab3 (GT-P5210) users and hence can’t be used in regular Galaxy Tab3 or other devices. Implementing the procedure in other devices might hard brick your device. Anyways, TechGipsy will not remain responsible for any sort of damage or data loss the device might undergo during the installation process. So proceed only if you understand what you do.
Pre-requisites
All important data and files of your Galaxy Tab3 should be provided a good back-up before this update since the update might erase your important data.
A computer and original USB cable should be kept ready for use.
Your PC must be pre-loaded with the Galaxy Tab3 drivers since the drivers will help you connect your device to your PC. If not installed, then at first download the drivers from the official site of Samsung.
The USB debugging option should be enabled by following the steps Menu > Settings > Applications.
To ensure if your USB debugging is enabled, navigate and tap on Developer Options. Don’t forget to disable the USB Debugging option post update.
Most importantly keep your phone battery fully charged. If it is not fully charged, at least maintain a minimum of 75% power back up before starting the update.
Steps to Update
First of all download the Android 4.4.2 XXUBNH1.zip file for your Galaxy Tab3 and extract it on the desktop of your Computer. Now download Odin v3.09.zip.
Then Put your Galaxy Tab3 into download mode by first turning off the phone and then pressing its Volume Down button, Power Button and Home Button simultaneously. Thereafter press the Volume Up Button again after a warning message appear on your screen, to put your Galaxy Tab3 into download mode.
Then launch Odin on your PC and connect the Galaxy Tab3 to the PC via USB cable.
The button-left corner of Odin will display a message after the connection of the Galaxy device with your PC is successful.
Now launch Odin on your PC, press “AP/ADB” in Odin and choose the “.tar.md5″ file 4.4.2 extracted XXUBNH1 folder. Make sure that re-partition option is unticked.
Next select the “Auto-reboot” option in Odin and press the “Start” button. The update process will take around 4-5 minutes. Wait still your Galaxy Tab3 (GT-P5210) restarts.
And Congratulations! You are now successfully done with the updating your Galaxy Tab3 (GT-P5210) Smartphone. Go ahead and experience the KitKat fun in your Galaxy device. In case of any issues, get back to us via the comment section. For further tech news, android updates and rooting,
Warning
Double check the Name and model of your device before initiating the update since this guide is meant for only the Galaxy Tab3 (GT-P5210) users and hence can’t be used in regular Galaxy Tab3 or other devices. Implementing the procedure in other devices might hard brick your device. Anyways, TechGipsy will not remain responsible for any sort of damage or data loss the device might undergo during the installation process. So proceed only if you understand what you do.
Pre-requisites
All important data and files of your Galaxy Tab3 should be provided a good back-up before this update since the update might erase your important data.
A computer and original USB cable should be kept ready for use.
Your PC must be pre-loaded with the Galaxy Tab3 drivers since the drivers will help you connect your device to your PC. If not installed, then at first download the drivers from the official site of Samsung.
The USB debugging option should be enabled by following the steps Menu > Settings > Applications.
To ensure if your USB debugging is enabled, navigate and tap on Developer Options. Don’t forget to disable the USB Debugging option post update.
Most importantly keep your phone battery fully charged. If it is not fully charged, at least maintain a minimum of 75% power back up before starting the update.
Steps to Update
First of all download the Android 4.4.2 XXUBNH1.zip file for your Galaxy Tab3 and extract it on the desktop of your Computer. Now download Odin v3.09.zip.
Then Put your Galaxy Tab3 into download mode by first turning off the phone and then pressing its Volume Down button, Power Button and Home Button simultaneously. Thereafter press the Volume Up Button again after a warning message appear on your screen, to put your Galaxy Tab3 into download mode.
Then launch Odin on your PC and connect the Galaxy Tab3 to the PC via USB cable.
The button-left corner of Odin will display a message after the connection of the Galaxy device with your PC is successful.
Now launch Odin on your PC, press “AP/ADB” in Odin and choose the “.tar.md5″ file 4.4.2 extracted XXUBNH1 folder. Make sure that re-partition option is unticked.
Next select the “Auto-reboot” option in Odin and press the “Start” button. The update process will take around 4-5 minutes. Wait still your Galaxy Tab3 (GT-P5210) restarts.
And Congratulations! You are now successfully done with the updating your Galaxy Tab3 (GT-P5210) Smartphone. Go ahead and experience the KitKat fun in your Galaxy device. In case of any issues, get back to us via the comment section. For further tech news, android updates and rooting,
No comments:
Post a Comment